Have a question? Call Customer Service @ 1-800-573-3955
This six-outlet power strip extends the functionality of electrical outlets, and gives extra reach to electrical cords. Features three-prong outlets to handle AV or printer equipment, and a circuit-breaker switch for maximum energy conservation when accessories are not in use. Features three-prong plug. Maximum load on all six outlets not to exceed 15 amps.
Six-Outlet Power Strip, 15-Foot Cord, 1-15/16 x 10-3/16 x 1-3/16, Ivory
Neatly feed wires away from desktops and work surfaces. Opening adjusts to three different sizes to accommodate multiple wires. Use for new installation or replacement on office equipment, computer components, entertainment systems and more.
Grommet, Adjustable, 2.38" Diameter, Black
Offers complete AC and Ethernet or phone line surge suppression for laptops, electronic notepads, personal organizers and other portable electronic devices. Compact portable housing weighing less than four ounces neatly fits into laptop travel cases. Retractable plug prevents scratching of expensive portable electronics. Offers two total outlets in a space saving direct plug-in format and diagnostic LEDs to warn of wiring problems and suppressor damage. Fail-safe thermal fusing protects against fire and other damage in the event of an extreme, extended overvoltage or surge condition.
Protect It! Portable Surge Protector, 2 Outlets, Direct Plug-In, 1050 Joules
Keep charging cords from dropping behind desk or workstation. Holds up to four cords in two channel sizes. Weighted, non-stick silicone base grips to surface without leaving residue. Rubberized, soft-touch finish.
Cord Catcher for Desks and Workstations, Black
More energy efficient than T12 fluorescent tubes. Have medium B-pin plugs so they fit the millions of existing T12 fixtures. Superior color rendering index levels. High lumen maintenance level. Long life - up to 48,000 hours. Low UV and low mercury. Meet all industry standards. Great value compared to major brands and are warrantied to perform.
Linear T8 Fluorescent Tube, 32 Watts, 30/Carton
Tripp Lite's HDMI Over Dual Cat5 Extender Kit is the perfect solution for those who need to extend a HDMI signal over a long distance over two Cat5/6 cables. Simply run two Cat5/6 cables between the local transmitter and remote receiver units, and plug in standard Tripp Lite HDMI cables to the HDMI source and the display. The B125-150 comes with both local transmitter and remote receiver units. DTS-HD, Dolby True HD and 7.1 Channel Surround Sound audio are supported, and it is compliant with HDCP, EDID and DDC. 24-bit True Color (8-bits per channel) is supported. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
CAT5/5e/6 Extender Kit, HDMI over Dual CAT5
The B126-1A1 HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to extend an HDMI signal to a projector, monitor or television. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the source is located farther than conventional cables allow. The B126-1A1 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. HDMI cable connects a monitor and the audio/video source to the transmitter’s HDMI ports and another monitor to the receiver. You can also connect up to three remote repeaters in the chain (using Cat5e/6 cable) for a total of five HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D). In addition to crystal-clear video, the B126-1A1 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
HDMI Over Single CAT5 Active Extender Kit
Allows you to extend a 1920 x 1440 (60Hz) video signal up to 500 ft., or a 1024 x 768 (60Hz) video signal up to 1,000 ft., when using a 24Awg, Solid Wire Cat5e/6 cable. The range and number of monitors can be further expanded by adding repeater units. Connect up to three repeaters, with the receiver at the end of the chain, for a total of four monitors. A 1920 x 1440 (60Hz) signal can be extended up to 500 ft. from the first repeater in the chain to the last receiver. A 1024 x 768 (60Hz) signal can be extended up to 1,000 ft. from the first repeater in the chain to the last receiver. For optimal image quality between 500 and 1,000 ft., use a Zero-Skew cable. The transmitter unit features functionality that allows for the EDID information from a connected display to be copied and sent to the connected computer, providing optimal compatibility. The remote (Receiver) unit features built-in Equalization and Gain controls to adjust the video image. Includes mounting hardware for both local and remote units, allowing them to be wall-mounted, rack-mounted or pole-mounted. Ideal for digital signage situations, such as retail, schools, churches, etc.
CAT5/5e/6 Extender Kit, VGA, TAA Compliant